In plastic modification and elastomer:

Improve surface gloss, eliminate surface defects caused by adding fillers (such as glass fiber, etc.), and reduce defective rate;

Increase the amount of filler, reduce the production cost, and have good dispersibility;

Improve the surface smoothness (hand feeling), wear resistance and scratch resistance of the product, improve the self-cleaning performance of the product, and have no adverse effect on the machinability of the final product;

Increase the extrusion speed of products, greatly reduce the defective rate, improve the fluidity of plastic processing, reduce the torque, mold filling and demoulding ability;

No migration phenomenon, good compatibility with polymer carrier;

Excellent lubrication and stable rheological properties;

Excellent thermal stability and color stability, good long-term stability in dispersion;

Used for film blowing, spinning dyeing or thin-walled injection molding;

Reduce the fracture rate of the film, excellent spot evaluation, reduce the fiber breakage rate, and inhibit pigment agglomeration;

Reduce the blockage of the filter part in front of the nozzle and the adhesion of the spinneret to improve the output, so the replacement times of the filter screen are less;

Reduce the generation of color spots on film and thin-walled injection molded parts, and improve the yield and color strength by reducing melt agglomeration and filler agglomeration;

Used in color masterbatch:

Reduce the amount of wax and pigment, enhance the color strength of pigment, and reduce the cost of raw materials;

The wax content in the masterbatch is low, which is not only beneficial to the subsequent processing, but also improves the performance of the final product.

The filler of pigment in a single color master batch can be increased, and it still has high coloring performance under the condition of low pigment addition;